No products in the cart.
-5%
Bus Bar Chamber System, Industrial Materials
Panasonic brand”Anchor by Panasonic” 200A 4P Busbar Chamber
Panasonic Anchor Busbar Chamber – 200A (Estimated Model):
Estimated Model Number: BBDS4200HF
Rated Current: 200A
Poles: 4 (3-phase + neutral)
Voltage: 415 V AC (3-phase), 50/60 Hz
Standards: IEC 60947 series
Construction: DIN-rail mountable, IP20, supports 10–50 mm² copper conductors
Mechanical Endurance: ~30,000 operations
Electrical Endurance: ~10,000 switching cycles
₦105,000.00 ₦110,000.00
The serviceable model for 200 A busbar chamber by Panasonic Anchor is likely BBDS4200HF—maintaining the same physical and technical design as the 100 A version but rated for higher current. Let me know if you’d like installation datasheets, pricing info, or supplier details in your region!
While the 100 A model is typically referenced as BBDS4100HF, the 200 A version normally follows the naming convention and is referred to as BBDS4200HF in Panasonic Anchor’s technical catalogues for DIN-rail busbar chambers.
Based on 0 reviews
Be the first to review “Panasonic brand”Anchor by Panasonic” 200A 4P Busbar Chamber”
You must be logged in to post a review.
Related products
- Industrial Materials, Transformer Accessories
70mm² AL AAC AAAC ACSR Bare All Aluminum Conductor
Key Features:
Lightweight: Easier to handle and install.
Corrosion Resistant: Performs well in various environments.
Cost-Effective: Economical choice for many applications.
Good Conductivity: Efficient electrical transmission.
Non-Magnetic: Suitable for specific electrical environments.SKU: n/a - Earthing Accessories, Industrial Materials
Multi Point Air Terminals Thunder Arrestor Copper Lighting Rod
Earthing Accessories, Industrial MaterialsMulti Point Air Terminals Thunder Arrestor Copper Lighting Rod
This Multi Point Air Terminals Thunder Arrestor Copper Lighting Rod, is a fundamental component designed for grounding and earthing systems. This high-quality and robust earth rod plays a critical role in safely dissipating electrical energy to the ground, ensuring the protection of people and equipment from electrical faults, lightning strikes, and other electrical hazards. It is an essential part of grounding systems in various applications.
Material: Copper
Required accessories :Brass air terminal base Lightning arrestor
Weight (Kg): 0.36
Warranty:1 Year
Standard of reference: BS EN 62561-2 : Lightning protection system components (LPSC) – Part 2: Requirements for conductors and earth electrodesSKU: EH7UO1TS - Cable Tray, Industrial Materials
50mm² x 50mm² Pre-Galvanized Mild Steel Cable Trunking
Product Name: Pre-Galvanized Steel Cable Trunking
Function: Support Cable
Surface Finish: Pre-Galvanized
Material: Steel
Material thickness: 1mm²
With cover: Yes
Side perforation: No
Bottom perforation: No
Height: 50mm²
Width: 50mm²
Length: 3000mm²
Sold in 3m lengths as standard
Suitable for internal applicationsSKU: EHP66J6I - Industrial Materials, Transformer
Automatic Circuit Recloser (ACR) Pole Mounted
Automatic Circuit Recloser (ACR) is an intellectual protective device capable of interrupting fault current and which purpose is to increase distribution system reliability. Their function is to automatically disconnect a section of feeder in the event of fault, such as a short circuit. After a certain period of time, the recloser makes a specified number of attempts to re-energize the line to restore power supply to consumers.
Main Functions of Reclosers
Recloser can be used both to perform simple protective functions and complex algorithms for automation of distribution networks. Modern reclosers perform the following functions:Automatic disconnection of damaged line sections;
Auto-reclosing;
Automatic restore of power supply from the network of alternative power source
local and remote network reconfiguration;
Self-diagnostics;
Measurement of network mode parameters;
Keeping the logs of operational and emergency events in the line;
Remote control.SKU: EHOZA59E
There are no reviews yet.