No products in the cart.
LED Down Light, Lighting
Ctorch 12watt LED Down Light
Power:12W
Luminous Flux:920Lm
CCT: 3000/4200/6500K
Ra: 80
Life(H): 10000H
Lamp Size:Φ120*70mm
Pieces/Carton: 36
₦12,000.00
CompareThe Ctorch LED Down Light – YUE Series offers sleek, energy-efficient recessed lighting for modern spaces. Designed for both residential and commercial applications, the YUE series provides a clean, uniform light output, enhancing ambiance while reducing energy consumption. Its durable construction and long lifespan make it a reliable and cost-effective lighting solution.
| color | White, Yellow |
|---|
Based on 0 reviews
Be the first to review “Ctorch 12watt LED Down Light”
You must be logged in to post a review.
Related products
- LED Modular Panel Light, Lighting
36w 600×600 LED Panel (Driver Inc) – Emergency & Dimmable
Brand: Bright Source
Wattage: 36w
Lumens: 3600
Product Size: 600x600mm
Product Finish: Glossy White
Operating Mode: External LED Driver
Special Features: Dimmable, Emergency, Driver Included, TPA Rated, UGR19
Average Lifespan (Hours): 50,000
IP Rating: IP20
CRI: 80
Beam Angle: 90
Energy Efficiency Rating: 80%
Equivalent Conventional Lamp Power: 4x18w
Operating Temperature: -20 – +40 Degrees
Warranty: 5 YearsSKU: n/a - Lighting, Street Light Pole
6 Meters Galvanized Street Light Pole
Material: Steel
Thickness: 3mm/5mm
Customized Length: 6m, 8m, 10m, 12m
Color: Customized
Welding: Two Oxygen Welding
Raw Material: Stainless
Shape: Conical Pole, Octagonal Pole, Square Pole, Diameter
Arms Customized: single-arm, double arms, triple arms, four arms
IP65 Waterproof
Warranty: 20 YearsSKU: EHF3OV1N-2 - Lighting, Street Light Pole
8 Meters Foreign Hot Dip Galvanized Street Light Pole
Specification
Customized Length : 8m
Shape: Conical Pole, Octagonal Pole, Square Pole, Diameter
Arms Customized: single-arm, double arms, triple arms, four arms
Stiffener: With big size to strength the pole to resist the wind
Powder coating: The thickness of powder coating is>100um.
Pure polyester plastic powder coating is stable and with strong adhesion & strong ultraviolet ray resistance.
Film thickness is more than 100 um and with strong adhesion. The surface is not peeling even with blade scratch (15×6 mm square).
Wind Resistance: According to local weather conditions, the General design strength of wind resistance is ≥150KM/H
Welding Standard: No crack, no leakage welding, no bite edge, weld smooth level off without the concave-convex fluctuation or any welding defects.
Hot-Dip Galvanized: The thickness of hot-galvanized>80um.
Hot Dip Inside and outside surface anti-corrosion treatment by hot dipping acid. which is in accord with BS EN ISO1461 or GB/T13912-92 standard. The designed life of the pole is more than 50 years, and the galvanized surface is smooth and the same color. Flake peeling hasn’t been seen after the maul test.SKU: EHF3OV1N-1
There are no reviews yet.