9inches 230mm Manrose Extractor Fan with Pullcord UK

This model is designed for manual operation from a switch or fused spur connection unit.
Mains voltage 220V – 240V AC 50Hz. This is the standard version of this fan, so requires only two electrical connections – live and neutral. No over-run timer, therefore no circuit board.
25 watts power consumption. Single speed. Can also be mounted on a wall
Automatic electrically operated back drought shutter with silent operation, opens / closes slowly on power up / power down
Requires a 230mm diameter hole. The glass thickness can be 4 to 22mm thick although you can use longer screws of the same gauge to bridge larger gaps if required. Supplied pre-flexed. This fan is normally wired up to a nearby fused spur connection unit, lighting circuit or a 13 amp plug can be fitted (requires 3 amp fuse)
Dimensions: 230mm high x 230mm wide x 230mm deep

Extractor Odor, Smoke, Humidity
Extractor Fan With Pull cord
Extraction rate of 668m³/h, 185 litres per second
Designed for Window Mounted, wall or ceiling installation
Single phase consuming 41w, 220-240v – AC. 50Hz
Double insulation – no earth required
Suitable for kitchens, utility rooms, restaurants etc
Used in Kitchen / Utility Room Locations
Fittings & fixings included
Ducting not included